How to improve the bearing capacity of Jiangmen Bridge
Now, the profit margin of cable tray is gradually tightening, which is closely related to the price rise of raw materials. Therefore, in order to complete the better development, it is necessary to carry out some technological innovation, such as forward carrying ability. Next, Jiangmen bridge to the following three common cable tray said.
1. Steel cable tray
The structural strength of the cable tray profile is higher than that of the ordinary plane plate. In general, the Jiangmen bridge uses mechanical pulling or limiting technology, and then changes the plane plate shape of the cable tray to advance the strength. For example, corrugated structure is selected for the bottom plate, upper edge and cover plate in the main structure of cable tray, or block concave convex structure similar to track is limited, so as to increase the strength of cable tray. At the same time, the heat dissipation area increases, and the structure is convenient for air permeability and heat exchange, and also reduces the energy loss of cables laid in the cable tray. Jiangmen bridge this kind of structure selects the low thickness plate to be able to satisfy the original bearing ability request, this will many reduce the use quantity of raw materials. According to the knowledge of Jiangmen bridge, the two processes have been tested by manufacturers, and both have good application effect. If further research is carried out along this direction, more and more new cable trays will be produced in the future.
In addition, for places with less cables and lighter cables, steel mesh can be used instead of steel plate. Jiangmen bridge tells you that this kind of structure is sensitive, suitable for various device conditions, convenient for air circulation and can effectively reduce the influence of electromagnetic interference. This kind of steel mesh cable tray greatly reduces the use of raw materials and effectively controls the cost of raw materials.
2. FRP cable tray
In the cable tray, due to the influence of its material function, the FRP cable tray has a certain gap with the steel cable tray in the aspects of bearing capacity, torsion resistance and tensile strength. However, due to its high corrosion resistance, it is widely used in chemical engineering and other work. In order to advance the strength of Jiangmen bridge, we can learn the method of aluminum alloy cable tray, and design the four sides into four sides Compared with the original structure, the hollow profile structure can be lined with steel bars to achieve the function of forward structure under the condition of consuming the same raw materials.
3. Aluminum alloy cable tray
The aluminum alloy cable tray is made of aluminum alloy material, so its structural strength is still relatively high. To further advance its strength, Jiangmen bridge tells you that you can select steel stiffeners to reinforce the ladder edges and rungs of the bridge, so as to reduce the plate thickness grade.
Source: Jiangmen bridge pipe http://szcsimc.com/
-
07-10
How to renew the damaged Jiangmen Bridge
Jiangmen bridge plays a very important role in the power industry. The bridge is widely used. The application environment of bridge products in bridges is sometimes bad. The bridge will inevitably be damaged in operation. Usually damaged bridges need to be replaced. Pay attention to safety when replacing bridges. The material of cable bridge is mostly steel. If exposed to various environments for a long time, it will inevitably suffer from corrosion, rust, high temperature burning damage and ext
-
07-10
What are the maintenance steps of Jiangmen bridge and pipeline
With the continuous development of social economy, the use of bridge in Guizhou is also increasingly extensive. As for the bridge, do the usual maintenance and protection work, which can well extend its life. Let's take a look at what protection operations there are. 1. Rust treatment: generally, two layers of chlorosulfonated primer are used for two-part derusting of cable tray. The quality of surface derusting directly affects the life of anti-corrosion engineering. Generally, the field derust
-
07-10
What are the installation requirements for Jiangmen bridge conduit
1. In the engineering design, the bridge should be comprehensively considered according to the economic rationality, technical feasibility, operation safety and other elements, and then the optimal scheme should be confirmed, which also needs to meet the requirements of installation, maintenance and cable placement. 2. When the bridge, trunking and its supports and hangers are used in corrosive environment. Anti corrosion treatment shall be adopted, which shall meet the requirements of engineeri
-
07-10
How to transport Jiangmen bridge and pipeline
Jiangmen bridge is usually customized by the manufacturer. As it is a kind of unconventional product, generally only the manufacturers in the provincial capital will be transported remotely. In the process of transportation, due to the road conditions and the quality problems of the bridge itself, the products will have a certain degree of wear and damage. How to transport the cable bridge? 1. We should ensure the quality of the cable bridge. The quality can ensure the bearing capacity of the br