What are the maintenance steps of Jiangmen bridge and pipeline
With the continuous development of social economy, the use of bridge in Guizhou is also increasingly extensive. As for the bridge, do the usual maintenance and protection work, which can well extend its life. Let's take a look at what protection operations there are.
1. Rust treatment
Generally, two layers of chlorosulfonated primer are used for two-part derusting of cable tray. The quality of surface derusting directly affects the service life of anti-corrosion engineering. The field derusting is generally carried out by grinder or manual derusting, and the primer shall be applied within 4 hours after surface treatment. If the treatment is not proper and new rust is found, it must be treated again.
2. Coating treatment
The coating process is divided into brush coating and roll coating. During brush or roll coating, each layer shall be repeated in a crisscross manner until uniform stop and no missing coating is found.
Construction environment requirements
The environment needs excellent ventilation, the temperature should be kept at 13 ℃ - 30 ℃, not lower than 5 ℃, and the relative humidity should be kept within 80%. Construction should not be carried out under intense sunlight. In case of rain, fog and strong wind, the construction shall not be carried out outdoors.
Source: Jiangmen bridge pipe http://szcsimc.com/
-
07-10
How to renew the damaged Jiangmen Bridge
Jiangmen bridge plays a very important role in the power industry. The bridge is widely used. The application environment of bridge products in bridges is sometimes bad. The bridge will inevitably be damaged in operation. Usually damaged bridges need to be replaced. Pay attention to safety when replacing bridges. The material of cable bridge is mostly steel. If exposed to various environments for a long time, it will inevitably suffer from corrosion, rust, high temperature burning damage and ext
-
07-10
What are the maintenance steps of Jiangmen bridge and pipeline
With the continuous development of social economy, the use of bridge in Guizhou is also increasingly extensive. As for the bridge, do the usual maintenance and protection work, which can well extend its life. Let's take a look at what protection operations there are. 1. Rust treatment: generally, two layers of chlorosulfonated primer are used for two-part derusting of cable tray. The quality of surface derusting directly affects the life of anti-corrosion engineering. Generally, the field derust
-
07-10
What are the installation requirements for Jiangmen bridge conduit
1. In the engineering design, the bridge should be comprehensively considered according to the economic rationality, technical feasibility, operation safety and other elements, and then the optimal scheme should be confirmed, which also needs to meet the requirements of installation, maintenance and cable placement. 2. When the bridge, trunking and its supports and hangers are used in corrosive environment. Anti corrosion treatment shall be adopted, which shall meet the requirements of engineeri
-
07-10
How to transport Jiangmen bridge and pipeline
Jiangmen bridge is usually customized by the manufacturer. As it is a kind of unconventional product, generally only the manufacturers in the provincial capital will be transported remotely. In the process of transportation, due to the road conditions and the quality problems of the bridge itself, the products will have a certain degree of wear and damage. How to transport the cable bridge? 1. We should ensure the quality of the cable bridge. The quality can ensure the bearing capacity of the br