Problems in installation of Jiangmen bridge and conduit
Jiangmen bridge line pipe summed up some problems according to the daily equipment of construction brothers. Assuming that the following situations can be avoided, most errors in equipment process can be avoided. Welcome to our lively comments!
1. The whole length of metal cable tray and its bracket is not solidly grounded (2 places);
2. The elastic joint is not set according to the standard requirements;
3. The cable tray and bracket are not fixed, and the bridge bracket is not grounded;
4. There is no fire blocking when crossing the fire compartment;
5. The aluminum alloy bridge and steel support are not insulated against electrochemical corrosion;
6. The bridge elbow, tee, etc. do not use the products and accessories matched with the bridge, but are processed on site, and the processing quality does not meet the standard requirements;
7. When the screw hanger equipment bridge is installed, the anti sway support is not set according to the standard requirements;
8. The steel support is not constructed according to the anti-corrosion requirements;
9. The grounding jumper wire is randomly connected at both ends of the bridge or is not connected, and the grounding jumper is not set at the conspicuous side;
10. The crimping sequence between the nose of grounding jumper and claw shaped gasket is reversed. Some of them are not provided with claw shaped gasket, and the grounding bolt of galvanized bridge is not provided with locking washer;
11. The tray and trough type bridge cover plate in the ceiling is missing;
12. The nuts of fixing bolts of Guizhou bridge connecting plate are installed on the inside of the bridge;
13. The bridge, distribution box, cabinet and steel pipe connected or connected are not grounded.
The above contents are arranged according to the problems encountered in the practical work of the students for reference. If there are any problems, please communicate and correct them in time.
Source: Jiangmen bridge line pipeline http://szcsimc.com/
-
07-10
How to renew the damaged Jiangmen Bridge
Jiangmen bridge plays a very important role in the power industry. The bridge is widely used. The application environment of bridge products in bridges is sometimes bad. The bridge will inevitably be damaged in operation. Usually damaged bridges need to be replaced. Pay attention to safety when replacing bridges. The material of cable bridge is mostly steel. If exposed to various environments for a long time, it will inevitably suffer from corrosion, rust, high temperature burning damage and ext
-
07-10
What are the maintenance steps of Jiangmen bridge and pipeline
With the continuous development of social economy, the use of bridge in Guizhou is also increasingly extensive. As for the bridge, do the usual maintenance and protection work, which can well extend its life. Let's take a look at what protection operations there are. 1. Rust treatment: generally, two layers of chlorosulfonated primer are used for two-part derusting of cable tray. The quality of surface derusting directly affects the life of anti-corrosion engineering. Generally, the field derust
-
07-10
What are the installation requirements for Jiangmen bridge conduit
1. In the engineering design, the bridge should be comprehensively considered according to the economic rationality, technical feasibility, operation safety and other elements, and then the optimal scheme should be confirmed, which also needs to meet the requirements of installation, maintenance and cable placement. 2. When the bridge, trunking and its supports and hangers are used in corrosive environment. Anti corrosion treatment shall be adopted, which shall meet the requirements of engineeri
-
07-10
How to transport Jiangmen bridge and pipeline
Jiangmen bridge is usually customized by the manufacturer. As it is a kind of unconventional product, generally only the manufacturers in the provincial capital will be transported remotely. In the process of transportation, due to the road conditions and the quality problems of the bridge itself, the products will have a certain degree of wear and damage. How to transport the cable bridge? 1. We should ensure the quality of the cable bridge. The quality can ensure the bearing capacity of the br